鸭脖娱乐

? Set as home page | Add to collection | contact us
?
Product knowledge
·Current location: Home page ?>> Product knowledge
It is necessary to clean and maintain your constant temperature hygrothermal machine
Related introduction
It is necessary to clean and maintain your constant temperature hygrothermal machine
Physical
The first step: it is to clean the appearance of the constant temperature hygrothermal machine with soapy water or ordinary water, and pay attention not to use corrosive liquid. And the floor around and at the bottom of the box should also be kept clean. Dust on the outside of the box should be reduced as much as possible, and it should be cleaned more than once a year.
The second step: clean the working area of the constant temperature hygrothermal machine. Before operation, the internal impurities of the constant temperature hygrothermal machine should be removed. The power distribution room should be cleaned at least once a year to avoid dust in the air from adsorbing on the machine surface or other accessories such as condenser and evaporator. After cleaning, dry the body and keep it dry.
The front is the internal and external cleaning of the body, the core components of the constant temperature hygrothermal machine: condenser, copper tube, evaporator, compressor and other refrigeration systems should pay attention to regular cleaning and timely removal of dust.
In particular, the condenser should be maintained every month on schedule. The dust attached to the heat dissipation mesh of the condenser should be removed by vacuum cleaner or brush or sprayed with high-pressure air to avoid overpressure and overload of the equipment. Check whether there is oil leakage in copper pipe, functional joint and welding joint. If there is leakage, it must be treated immediately.
Third: Constant temperature hygrothermal machine The circuit breaker and over temperature protector in the system should also be inspected regularly. In order to ensure the safety of the test object and operator.
Fourth: the water storage tank in the constant temperature hygrothermal machine should be replaced once a month, and only pure water can be used. The humidifying water tray should be cleaned once a month to ensure smooth water flow. Finally, we should pay attention to the time of changing the ball wet gauze. It is recommended to replace it once every three months.
?